Headbox for Paper Machine Culture Paper Making Machine Kraft Paper Making Machine Headbox
Stainless steel or copper is used for all parts that come into contact with the slurry and the rotating parts that need
Basic Info
Type | Paperboard |
Sheet Former Type | Fourdrinier Wire |
Paper Thickness | Thick Paper |
Automation | Automatic |
Certification | CE |
Customized | Customized |
Condition | New |
Raw Material Ratio | Waste Paper Pulp. etc |
Finished Paper GSM | 90-260GSM |
Concentration on Wire | 0.8%-1.3% |
Feeding Pipe | All Stainless Steel 304 |
Side Wall | Stainless Steel Plate 304 |
Upper Part | Stainless Steel Plate 304 |
Bottom Part | 316L Stainless Steel + Q235 Combination |
Upper Lip Frame | Stainless Steel 304 |
Lower Lip | 316L |
Support | Q235 (Outsourcing Stainless Steel) |
Transport Package | Wooden Case |
Specification | Width of slurry tank nozzle is 3500mm |
Trademark | GLM |
Origin | Made in China |
HS Code | 8439200000 |
Production Capacity | 50000PCS/Year |
Product Description
Raw Material Ratio | waste paper pulp,etc |
Finished Paper Grammage Range | fluting raw paper :90-260 g/m2 |
Tirm Width | 3500mm(rolled paper width 3550mm |
Nozzle Width | 3750mm |
Working Speed:400m/min, Design Speed | 450m/min |
Maximum flow of the cone inlet | m3/h |
Paper width shrinking percentage | <=4 |
Arrangement type | right side machine (looking from the reel to the headbox |
Concentration onto wire | fluting paper:0.8%~1.3% |
Stainless steel or copper is used for all parts that come into contact with the slurry and the
rotating parts that need to be adjusted.
1. Feeding pipe: all stainless steel (304) (including matching flange)
2. stepped orifice plate: use a piece of plexiglass;
3. Side wall: stainless steel plate (304);
4. Upper part: stainless steel plate (304);
5. Bottom beam: with stainless steel (316L) + Q235 combination;
6. Upper lip frame: stainless steel (304);
7. The upper lip and the vertical small lip are made of stainless steel (316L);
8. Homogenizing roller: stainless seamless steel pipe (1Gr18Ni9Ti);
9. Lower lip (316L);
10. spinner: using cast aluminum;
11. Support: Q235 (outsourcing stainless steel)
Q.:Are you a factory or trading company?
A.: We are a factory and manufacturer.
Q.:How does your factory do regarding quality control?
A.:We pay much attention on quality controlling from very beginning to the very end.
Fully check and test takes before shipment.
Q.:Where is your factory located? How can I visit there?
A.:Our factory located at Shandong, China.You can fly to QINGDAO international
airport directly. We will arrange to pick you up.
Q.:What's service or guarantee can you offer?
A.: One year guarantee for key parts of machine, Machine installing and worker
training service, free technical support whole life.
Send to us